TECNA ATEX kevennin

ATEX Balancer

Balancers for ATEX environments are specially designed to be safe in environments where there is a risk of explosion or ignition. It is important to note that the balancer meets the requirements of the ATEX space. TECNA balancers are designed to meet the strict safety standards set by the European Union for equipment used in potentially explosive atmospheres. Balancers designed for the ATEX environment are available from 0.2 kg to 100 kg.

  • Balancers can carry loads from 0.2 kg to 100 kg
  • The lenght of standard cables from 1.6 m to 2.7 m
  • Stainless steel cable
  • Available also in Zero Gravity models
  • Manufactured according to DIN 15112 directive

 

More from Tecna >>

Category:

Description

ATEX standard balancers
ItemLoad (kg)Standard cable lenght (mm)
9310AX0,2 – 0,51 600
9311AX0,4 – 11 600
9312AX1 – 21 600
9313AX2 – 31 600
9320AX1 – 2,52 000
9321AX2 – 42 000
9322AX4 – 62 000
9323AX6 – 82 000
9336LAX0,5 – 22 500
9336AX2 – 42 500
9337AX4 – 62 500
9338AX6 – 82 500
9346AX2 – 42 500
9347AX4 – 62 500
9348AX6 – 82 500
9346LAX0,5 – 22 500
9339AX8 – 102 500
9340AX10 – 142 500
9349AX8 – 102 500
9349AX10 – 142 500
ATEX Zero-Gravity balancers
ItemLoad (kg)Standard cable lenght (mm)
9354AX4 – 72 000
9355AX7 – 102 000
9356AX10 – 142 000
9357AX14 – 182 000
9358AX18 – 222 000
9359AX22 – 252 000
9502AX20 – 302 100
9503AX30 – 402 100
9504AX40 – 502 100
9505AX50 – 602 100
9506AX60 – 702 100
9507AX70 – 802 100
9508AX80 – 902 100
9509AX90 – 1002 100
9520AX12 – 202 700
9521AX20 – 302 700
9522AX30 – 402 700
9523AX40 – 502 700
9524AX50 – 602 700
9525AX60 – 702 700

Brand

TECNA

Tecna header

TECNA

TECNA balancers are manufactured in Italy following the highest quality standards. Balancers are built to last a long time and make work more ergonomic. With TECNA balancers you can make your work easier. Balancers play a key role in reducing the burden on the employee. Balancers can reduce the load on the employee while speeding up the work. Balancers can also be used to reduce the load on tools and hoses, allowing tools to be used longer. All TECNA balancers are made according to the DIN 15112 directive. TECNA balancers are also available for ATEX and ESD environments. Visit manufacturer's website >>

Product Sheet

Product Sheet (in Finnish) [PDF]


You may also like…